studmap Start

Critters Cult

Critter Bimm

Critter Bimm from Critters Cult as a 48 × 48 stud LEGO mosaic on one baseplate.

Studs
48 × 48
Plates
549
Baseplates
1
Est. parts
$120–178

Build steps

,

1

Piece list

549 plates cover 2,304 studs. The number in each swatch is the code used in the build steps. Order quantities add spares.

CodeBrickLink colourPlatePartBL IDNeededOrder
1 Dark Bluish Gray Plate 4×4303185 6367
Plate 2×8303485 67
Plate 2×6379585 78
Plate 1×8346085 1314
Plate 2×4302085 23
Plate 1×6366685 89
Plate 2×3302185 34
Plate 1×4371085 910
Plate 2×2302285 34
Plate 1×3362385 56
Plate 1×2302385 1516
Plate 1×1302485 3040
2 Black Plate 2×6379511 45
Plate 1×8346011 45
Plate 2×4302011 34
Plate 1×6366611 910
Plate 2×3302111 56
Plate 1×4371011 1516
Plate 2×2302211 78
Plate 1×3362311 1718
Plate 1×2302311 5356
Plate 1×1302411 6380
3 Dark Brown Plate 2×33021120 34
Plate 1×43710120 34
Plate 2×23022120 23
Plate 1×33623120 56
Plate 1×23023120 1819
Plate 1×13024120 3350
4 Medium Nougat Plate 1×23023150 89
Plate 1×13024150 3650
5 Dark Tan Plate 2×3302169 12
Plate 1×3362369 23
Plate 1×2302369 56
Plate 1×1302469 2030
6 Sand Blue Plate 2×2302255 12
Plate 1×3362355 12
Plate 1×2302355 910
Plate 1×1302455 1530
7 Light Nougat Plate 1×4371090 12
Plate 1×2302390 67
Plate 1×1302490 920
8 Light Bluish Gray Plate 1×2302386 12
Plate 1×1302486 520
9 Bright Light Orange Plate 1×23023110 12
Plate 1×13024110 420
A Light Aqua Plate 1×13024152 520
B Magenta Plate 1×1302471 420
C Dark Green Plate 1×2302380 12
Plate 1×1302480 220
D Tan Plate 1×130242 220
E Nougat Plate 1×1302428 220
Total plates549801

Also needed

Rough cost

The baseplate is $14.99 (LEGO list price). The 801 plates come to roughly $104.77 to $162.66. Parts total: $119.76 to $177.65.

Plates are counted at the 1×1 rate of $0.04 to $0.06 a stud (BrickLink price guide, 21 October 2026). Bigger plates cost less per stud, so the real total is lower. Add seller postage.

Before you build

  1. Upload the wanted list to BrickLink, or the Pick a Brick list at LEGO Pick a Brick (Upload a list). Confirm stock before paying.
  2. Sort the plates into tubs by code.
  3. Each baseplate has nine 16×16 sections. Sections with nothing on them are skipped.
  4. Each step adds one colour. The box shows which plates and how many, and the new ones are outlined in yellow. Count studs in from the row and column numbers.
  5. After every section, press the plates down with a flat book and tick it off.

Finishing

  1. Cut the backing board to 384 × 384 mm, or larger if you want a border for a frame.
  2. Fix the baseplate square to the board.
  3. Hang it from fixings screwed into the board, rated for its weight.